User Manual

ManualsBrandsBrother ManualsComputer equipmentHL-3075CW

161

162

163

164

165

166

167

168

169

170

Table Of Contents

USER’S GUIDE HL-3045CN HL-3075CW

Troubleshooting

159

Poor fixing

 Make sure that the media type setting in the driver matches the type of paper

you are using. (See About paper on page 1.)

 Make sure that two

grey levers inside the back cover are in the up position.

 Choose Improve Toner Fixing mode in the printer driver. See Improve Print

Output in Improve Print Output on page 44 (For Windows

printer driver),

Advanced options on page 50 (For Windows

BR-Script printer driver) or

Print Settings on page 59 (For Macintosh printer driver).

If this selection does not provide enough improvement, select Thicker paper

in Media type settings.

Curled or wavy

 Choose Reduce Paper Curl mode in the printer driver when you do not use

our recommended paper. See Improve Print Output in Improve Print Output

on page 44 (For Windows

printer driver), Advanced options on page 50 (For

Windows

BR-Script printer driver) or Print Settings on page 59 (For

Macintosh printer driver).

 If you do not use the printer often, the paper may have been in the paper tray

too long. Turn over the stack of paper in the paper tray. Also, fan the paper

stack and then rotate the paper 180 in the paper tray.

 Store the paper where it will not be exposed to high temperatures and high

humidity.

Uneven density or faded

 Fully open the top cover and then close it again.

Envelope creases

 Make sure that the envelope levers inside the back cover is pulled down when

you print the envelope.

Examples of poor print quality Recommendation

ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.

ABCDEFG

EFGHIJKLMN