User Manual
Table Of Contents
- USER’S GUIDE HL-3045CN HL-3075CW
- Symbols and conventions used in the documentation
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3075CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3075CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3075CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3075CW only)
- Quick reference for bar code control commands (HL-3075CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Routine Maintenance
134
5
Note
• Make sure that the paper is straight and in the correct position on the manual feed slot. If it is not, the paper
may not be fed properly, resulting in a skewed printout or a paper jam.
• Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
• If you put paper in the manual feed slot before the printer is in the Ready state, an error may occur and
the printer will stop printing.
d Make sure that the printer is in the Ready state. Press + or - to choose Color Correction. Press OK.
Select ab or OK
h
Color Correction
e Press + or - to choose Drum Cleaning.
Drum Cleaning
f Press Go. The printer will pull in the piece of paper and start cleaning the drum unit.
g When the printer has finished cleaning, Completed appears on the LCD. Press Cancel so that the
printer returns to the Ready state.
h Repeat steps c to g two more times using a new blank sheet of paper each time. Upon completion
please discard the used paper. If the print problem is not resolved please contact Brother Customer
Service.
Please Wait