Quick Setup Guide
Table Of Contents
- Quick Setup Guide HL-3075CW
- Start Here
- For USB Interface Cable Users (For Windows® users)
- For USB Interface Cable Users (For Mac OS X users)
- For Wired Network Interface Cable Users (For Windows® users)
- For Wired Network Interface Cable Users (For Mac OS X users)
- For Wireless Network Interface Users
- 8 Before you begin
- 9 Choose your wireless setup method
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Windows® Users)
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Macintosh Users)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Install the Printer Driver (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- Install the Printer Driver (Mac OS X 10.4.11 - 10.6.x)
- For Network Users
- Other Information
- Options and Consumables
36
Other Information
HOT SURFACE
• After you have just used the product, some internal parts will be extremely hot. To prevent injury, DO
NOT touch the shaded parts shown in the illustration, when you open the top or back cover (back
output tray).
• DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed
and can pinch or entrap your hand.
Inside the product
(Top View)
Inside the product
(Back View)
IMPORTANT
DO NOT remove or damage the caution labels located on or in the product.
Note
Lightning and power surges can damage this product. We recommend that you use a quality surge protection device on
the AC power line and any Ethernet (RJ-45) cable plugged into the product.