Quick Setup Guide
Table Of Contents
- Quick Setup Guide HL-3075CW
- Start Here
- For USB Interface Cable Users (For Windows® users)
- For USB Interface Cable Users (For Mac OS X users)
- For Wired Network Interface Cable Users (For Windows® users)
- For Wired Network Interface Cable Users (For Mac OS X users)
- For Wireless Network Interface Users
- 8 Before you begin
- 9 Choose your wireless setup method
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Windows® Users)
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Macintosh Users)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Install the Printer Driver (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- Install the Printer Driver (Mac OS X 10.4.11 - 10.6.x)
- For Network Users
- Other Information
- Options and Consumables
25
MacintoshWireless Network
Windows
®
Macintosh
Wireless Network
Configuration using the Installation CD-ROM and temporarily using a USB cable
(For Macintosh Users)
10
Configure the wireless
settings
a Turn on your Macintosh. Put the installation
CD-ROM into your CD-ROM drive.
b Double-click the Start Here OSX icon. Follow
the on-screen instructions.
c Choose Wireless Network Connection and
then click Next.
d Choose Temporarily use a USB cable
(Recommended) and then click Next.
e Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
f Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
g The wizard will search for wireless networks
available from your machine. Choose the SSID
that you wrote down for your network in step 9
on page 21, and then click Next.
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).