Quick Setup Guide
Table Of Contents
- Quick Setup Guide HL-3075CW
- Start Here
- For USB Interface Cable Users (For Windows® users)
- For USB Interface Cable Users (For Mac OS X users)
- For Wired Network Interface Cable Users (For Windows® users)
- For Wired Network Interface Cable Users (For Mac OS X users)
- For Wireless Network Interface Users
- 8 Before you begin
- 9 Choose your wireless setup method
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Windows® Users)
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Macintosh Users)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Install the Printer Driver (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- Install the Printer Driver (Mac OS X 10.4.11 - 10.6.x)
- For Network Users
- Other Information
- Options and Consumables
23
Windows
®
Wireless Network
Windows
®
Macintosh
Wireless Network
Configuration using the Installation CD-ROM and temporarily using a USB cable
(For Windows
®
Users)
10
Configure the wireless
settings
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
b Click Install Printer Driver.
c Click Wireless Network users.
d Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
e Choose Temporarily use a USB cable
(Recommended) and then click Next.
f If this screen appears, read the Important
Notice. Check the box after you confirm the
SSID and Network Key, and then click Next.
g Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).
Note
If the Brother screen does not appear automatically,
go to
My Computer (Computer)
, double-click the
CD-ROM icon, and then double-click
start.exe
.
Note
For Windows Vista
®
and Windows
®
7, when the
User Account Control screen appears, click
Allow or Yes.