Quick Setup Guide
Table Of Contents
- Quick Setup Guide HL-3075CW
- Start Here
- For USB Interface Cable Users (For Windows® users)
- For USB Interface Cable Users (For Mac OS X users)
- For Wired Network Interface Cable Users (For Windows® users)
- For Wired Network Interface Cable Users (For Mac OS X users)
- For Wireless Network Interface Users
- 8 Before you begin
- 9 Choose your wireless setup method
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Windows® Users)
- Configuration using the Installation CD-ROM and temporarily using a USB cable (For Macintosh Users)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Install the Printer Driver (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- Install the Printer Driver (Mac OS X 10.4.11 - 10.6.x)
- For Network Users
- Other Information
- Options and Consumables
11
MacintoshUSB
Windows
®
Macintosh
USB
For USB Interface Cable Users
8
Connect the printer to
your Macintosh and
install the driver
a Remove the label covering the USB interface
connector.
b Connect the USB cable to the USB connector
marked with a symbol, and then connect
the cable to your Macintosh.
c Make sure the printer power switch is on.
d Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
e Double-click the Start Here OSX icon. Follow
the on-screen instructions.
f Choose Local Connection, and then click
Next. Follow the on-screen instructions.
IMPORTANT
• Make sure there are no USB Flash memory
drive inserted.
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.
Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).
Note
It may take a few minutes for installation to
complete.