Colour Printer User's Guide
Table Of Contents
- User's Guide HL-3040CN/3070CW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3070CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3070CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3070CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3070CW only)
- Quick reference for bar code control commands (HL-3070CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Control Panel
78
3
Back light (HL-3070CW only) 3
LCD messages 3
The message on the LCD shows the current printer status during normal operation.
Ready
The mark indicates the wireless signal strength with four levels. ( means no signal, means weak,
means middle, and means strong.) (HL-3070CW only)
When an error has occurred, the type of error is displayed on the LCD message at first as shown below.
Cover is open
Next, the second message which shows information for clearing the error is displayed on the LCD message
as shown below.
Close the Top Co
Printer status messages 3
The following table shows the printer status messages during normal operation:
Light Meaning
Off The printer is off or in sleep status.
Green (General, Error, Setting) Ready to print
Printing
Warming up
There is a problem with the printer.
Choosing a menu (Control panel menu, Reprint menu or Direct Print menu)
Pause
Printer Status Message Meaning
Cooling Down The printer is cooling down.
Cancel Printing Canceling the job.
Ignore Data Printer is ignoring data processed using the PS driver.
Pause The printer has suspended its operations. Press Go to start the printer again.
Please Wait The printer is warming up.
The printer is carrying out the calibration process.
Printing Printing.
Ready Ready to print.
Sleep In Sleep mode.