Colour Printer User's Guide
Table Of Contents
- User's Guide HL-3040CN/3070CW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3070CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3070CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3070CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3070CW only)
- Quick reference for bar code control commands (HL-3070CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
iv
This printer is heavy and weighs approximately 19.0 kg (41.9 lb). To prevent injuries when moving or lifting
this printer, make sure to use at least two people. Be careful not to pinch your fingers when you set the
printer back down.
CAUT ION
After you have just used the printer, some internal parts of the printer will be extremely hot. When you open
the top or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the
illustration.
Put your printer on a flat, stable surface such as a desk that is free of vibration and shocks.
Only use the printer within the following ranges of temperature and humidity:
Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% (without condensation)
Use the printer in a well-ventilated room.
Avoid placing your machine in a high-traffic area.
DO NOT put the printer where the ventilation hole of the printer is blocked. Keep a gap of roughly 100 mm
(4 in.) between the ventilation hole and the wall.
Inside the printer
(Top View)
Inside the printer
(Back View)