Colour Printer User's Guide
Table Of Contents
- User's Guide HL-3040CN/3070CW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3070CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3070CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3070CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3070CW only)
- Quick reference for bar code control commands (HL-3070CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Troubleshooting
145
6
1
(X) shows the toner cartridge or drum unit colour that is near the end of its life. (K)=Black, (Y)=Yellow, (M)=Magenta, (C)=Cyan.
Maintenance messages
Error message Meaning Action
Toner Low (X)
1
The toner cartridge is near the end of
its life.
Buy a new toner cartridge for the colour that is
indicated on the LCD before you get a Replace
Toner message.
Drums End Soon The drum units are near the end of
their life.
Buy a new drum unit set before you get a Replace
Drums message.
Drum End Soon(X)
1
The drum unit for the colour indicated
on the LCD is near the end of its life.
Buy a new drum unit for the colour indicated on the
LCD before you get a Replace Drum (X)
message.
Belt End Soon The belt unit is near the end of its life. Buy a new belt unit before you get a Replace
Belt message.
WT Box End Soon The waste toner box is almost full. Buy a new waste toner box before you get a
Replace WT Box message.
Replace Toner It is time to replace the toner cartridge. Replace the toner cartridge for the colour indicated
on the LCD. (See Replacing the toner cartridges
on page 105.)
Replace Drums It is time to replace the drum units. Replace the drum units. (See Replacing the drum
units on page 113.)
Replace Drum (X)
1
It is time to replace the drum unit for
the indicated colour.
Replace the drum unit for the colour indicated on
the LCD. (See Replacing the drum units
on page 113.)
Replace Belt It is time to replace the belt unit. Replace the belt unit. (See Replacing the belt unit
on page 118.)
Replace WT box It is time to replace the waste toner
box.
Replace the waste toner box. (See Replacing the
waste toner box on page 123.)
Replace PF Kit1 It is time to replace the paper feeding
kit 1.
Replace the paper feeding kit 1. Call your dealer or
Brother Customer Service.
Replace Fuser It is time to replace the fuser unit. Replace the fuser unit. Call your dealer or Brother
Customer Service.
Call service messages
Call service message Action
Print Unable ##
(Except Print Unable 1A)
Turn off the printer. Wait a few seconds, then turn it on again. If this does not clear the
error, call your dealer or a Brother Customer Service.