Printer User Manual
Table Of Contents
- USER’S GUIDE HL-2130 HL-2132 HL-2135W HL-2220 HL-2230 HL-2240 HL-2240D HL-2242D HL-2250DN HL-2270DW
- Using this guide
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Resolution
- Print Settings
- Multiple Page
- Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Administrator
- Other Print Options...
- Use Reprint
- Sleep Time
- Macro (HL-2250DN / HL-2270DW only)
- Density Adjustment
- Error Message Printout
- Improve Print Output
- Skip Blank Page
- Print Profiles tab
- Support
- Tray Settings
- Status Monitor
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Routine Maintenance
- 5 Troubleshooting
- A Appendix
- Machine specifications
- Symbol and character sets (HL-2250DN / HL-2270DW only)
- Quick reference for bar code control commands (HL-2250DN / HL-2270DW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Table of Code (EAN) 128 set C
- Print bar codes or expanded characters
- B Appendix (for Europe and Other Countries)
- C Appendix (for USA and Canada)
- Index
100
5
5
You can correct most problems by yourself. If you need additional help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/
.
Identifying your problem 5
First, check the following: 5
The AC power cord is connected properly and the machine is turned on.
All of the protective parts have been removed.
The toner cartridge and drum unit is installed properly.
The front cover, back cover, and fuser cover are completely closed.
Paper is inserted properly in the paper tray.
The interface cable is securely connected to the machine and the computer.
The correct driver for the machine has been chosen and is installed.
The computer is set up to connect to the correct machine port.
Machine does not print:
5
If you did not solve your problem with the above checks, identify your problem and then go to the page
suggested below.
Machine's LEDs are flashing
See LEDs (Light Emitting Diodes) on page 53.
Status Monitor Error Message appears
See Error messages in the Status Monitor on page 101.
Paper handling
(See Paper handling on page 103 and Paper jams and how to clear them on page 105.)
Other problems
(See Other problems on page 120.)
Pages are printed, but there are problems with:
5
Print quality
(See Improving the print quality on page 112.)
Printout is incorrect
(See Solving print problems on page 119.)
Troubleshooting 5