Specifications

MODEL 2180 SERIES PRINTER OPERATION AND MAINTENANCE

DataMetrics Corporation

5. MAINTENANCE

5.1. Introduction

This chapter provides information and instructions concerning Model 2180 Series printer tools and

test equipment, routine maintenance, fault isolation, and the removal and installation of replaceable

components and subassemblies.

5.2. Tools and Test Equipment

The following tools and test equipment are required to maintain the printer:

• Common hand tools

• TORX #10 screwdriver

• Digital voltmeter

• Host computer with compatible data interface

5.3. Routine Maintenance

5.3.1. Replacing the Consumables

Normal print operations require consumables to be replaced regularly. The following messages will

appear on the LCD panel.

• TONER LOW

• TONER EMPTY

• CHANGE DRUM SOON

Refer to the Brother Laser Printer HL-1800 series User’s Guide supplemental documentation.

5.3.2. Replacing Maintenance Parts

Replacement of maintenance parts to maintain print quality will cause the following messages will

appear on the LCD panel.

• REPLACE FUSER

• REPLACE PF KIT

• REPLACE LASER

Refer to the Brother Laser Printer HL-1800 series User’s Guide supplemental documentation.

5.3.3. Cleaning

5.3.3.1 Cleaning the Printer Interior

Cleaning the printer interior for if printouts are stained with toner.

a. Open the front access door and remove the top cover.

b. Unfasten and remove the drum unit assembly retainer located at the top of the print engine.