User`s guide

1-28
☛
☛☛
☛ 3.
Open the Face up output tray.
Fig. 1-19
☛
☛☛
☛ 4.
Place envelopes in the Multi-purpose tray so they touch the back of the tray
and remain below the limit mark.
Fig. 1-20
✒
✒✒
✒ Note
When you place paper in the Multi-purpose tray, note the following:
• If you will be printing on paper that weighs more than 135 g/m
2
(36 lbs),
use the face up output tray.
• Insert the leading edge of the paper first and push it gently into the tray.
• The top of the paper stack must be under the guides that are on both
sides of the tray. The maximum thickness is 11 mm (or 0.43 inch).
• The printed side must be face up.