Specifications
Problem
Keyboard Error ap-
pears on my screen.
Possible Solution
Turn the power off to the notebook and all peripheral devices (external
modem, printer), wait ten seconds, and then turn the power back on.
Always turn the power on to the notebook before any peripherals.
The screen looks If the cover is closed during si_ecial charge, the screen will become warm
blurry, and appear blurry. After a few minutes, it will cool.
This message ap-
pears: Document is
too big. Please break
it up into smaller
documents.
This message ap-
pears: Please close
one document (in
Word Processing or
Drawing).
I cannot find the
document I am look-
ing for.
This message ap:.__.
-pears: A disk could -
not be found.
Cursor will not mo-_re
where I want it to
go.
The size of your document is greater than or equal to 500KB. Save this
document to diskette and begin another document at this point. If you
choose not to save, you could lose all your work.
The size of the two documents you have open is greater than or equal to
500KB. Save one or both documents to a diskette and begin another
document at this point. If you choose not to save, you could lose all
your work.
Make sure that you have opened the correct program. The list of
documents shows only documents created in the program you are using.
Use the si:rol! bar to see more of the list.
Use File Manager to view the contents of the F drive and other diskettes.
Insert a diskette.
To move the insertion point to a certain place, you must have text in that
area. Press ENTER to move the insertion point down the page.
Numbers appear Turn Num Lock off by pressing NUM LOCK on the keyboard or by
when I type. clicking Num on the screen.
The hourglass icon
appears, and I can-
not move it with the_
glidepad.
,,=_
The hourglass icon
appears, and I can
move it but nothing
is happening.
You have tried to do something that exceeds the memory. You may have
lost some of your work. Turn off the machine for 10 seconds and turn it
back on again.
Wait a few minutes to be sure that the notebook is not processing the last
task you asked it to do. If you still have the problem, turn the unit off for
10 sec. and turn it back on. You may have lost some of your work.
Appendix 136