Owner's Manual

T-8420B, 8450B, 8720B, 8750B

3. TABLE AND MOTOR

A. Table processing diagram

y The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the

vibration of the sewing machine.

y Drill holes as indicated in the illustration below.

B. Motor

CAUTION

All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the

cords or secure them too firmly with staples, otherwise there is the danger that fire or electric shocks could occur.

<Motor>

・ Use one of the clutch motors given in the table at right as the motor.

・ Refer to the instruction manual for the motor for details on installing

and using the motor.

Select the correct motor pulley and V-belt by referring to the table below to suit the power frequency of your area.

Sewing speed Frequency Motor pulley (Outer diameter) V-belt

50 Hz Motor pulley 100 46

4,000 rpm

60 Hz Motor pulley 85 45

50 Hz Motor pulley 90 45

3,500 rpm

60 Hz Motor pulley 70 44

50 Hz Motor pulley 75 44

3,000 rpm

60 Hz Motor pulley 65 43

Power Motor

Single-phase 2-pole, 400 W motor

Three-phase 2-pole, 400 W motor

Motor mounting holes

Head rest hole

Ground wire hole

Cotton stand hole

2958M