Printer Manual FAX-4100/4100e ®
Table of Contents 1 Printer Driver Settings (For Windows® Only) ............................. 1-1 Using the Brother FAX-4100/4100e Printer Driver.................. 1-1 Features in the Printer Driver .............................................. 1-1 Basic Tab.................................................................................... 1-2 Paper Size ............................................................................ 1-3 Multiple Page.........................................................
Features in the Printer Driver (For Windows® 2000)............... 1-15 General Tab ....................................................................... 1-15 Printing Preferences ...................................................... 1-15 Layout Tab......................................................................... 1-16 *1 Orientation ............................................................... 1-16 *2 Pages Per Sheet ........................................................
1 Printer Driver Settings 1 (For Windows® Only) Using the Brother FAX-4100/4100e Printer Driver A Printer Driver is software that translates data from the format used by a computer into the format required by a particular printer. A driver uses a printer command language or page description language. The latest printer driver can also be downloaded from the Brother Solutions Center at http://solutions.brother.com.
Basic Tab *1 *2 *3 *1 Select the Paper size, Multiple Page and Orientation. *2 Select number of Copies and Media Type. *3 Select Paper Source, First Page and Other Pages.
Paper Size From the drop-down box select the Paper Size you are using. Multiple Page The Multiple Page selection can reduce the image size of a page allowing multiple pages to be printed on one sheet of paper or enlarging the image size for printing on page on multiple sheets of paper. Ex. 4 in 1 Ex. 1 in 2 × 2 pages Border Line When printing multiple pages on one sheet with the Multiple Page feature you can select to have a solid border, dash border or no border around each page on the sheet.
Collate The collate selection is active if more than one copy is selected. With the collate check box selected, one complete copy of your document will be printed and then repeated for the number of copies you selected. If the collate check box is not selected then each page will be printed for all the copies selected before the next page in the document is printed. Collate box checked Collate box not checked Media Type You can use the following types of media in your printer.
Advanced Tab *2 *3 *4 *5 *1 Change the tab settings by selecting one of the following icons: *1 *2 *3 *4 *5 Print Quality Duplex Printing Watermark Page Setting Device Option Print Quality Resolution You can change the resolution as follows: • 300 dpi • 600 dpi Toner Save You can save running costs by turning on the Toner Save Mode, which reduces the print density.
Print Setting (For Windows® 95/98/98SE/Me Only) Print Setting is used for optimizing your print quality for the type of document being printed (Photos, Graphics or Scanned Images). When you choose Auto (Recommended), the printer automatically prints with the most suitable print settings. With the Print Setting set to Manual, you can change the Brightness, Contrast and Graphics Quality options manually. Duplex Printing Choosing the Duplex Printing icon displays the Manual Duplex features available.
Watermark You can place a logo or text into your document as a Watermark by using a bitmap file as your source file or select one of the preset Watermarks. Print Watermark The Print Watermark feature offers printing choices of: On all pages On first page only From second page Custom In Background With the In Background feature checked the Watermark will print behind your document on the page. If this feature is not checked then the Watermark will print on top of your document.
You can change the size and the position of the Watermark on the page by selecting the Watermark and clicking the Edit button. If you want to add a new Watermark, click the New button and select Text or Bitmap from the Watermark Style. Watermark Text Enter your Watermark text into the Text Box and select the Font, Size, Darkness and Style. Watermark Bitmap Enter the file name and location of your bitmap image in the File box or Browse for the file location. You can also set the scaling size of the image.
Page Setting You can change the print size of your document with the Scaling feature. 1 Check Off if you want to print the document as it appears on your screen. 2 Check Fit to Paper Size, if your document has an unusual size, or if you have only the standard size paper. 3 Check the Free box if you want to reduce or enlarge the output. You can also use the Mirror or Reverse Print feature for your page setting.
Device Options Set one of the following Printer Functions: Quick Print Setup Administrator (For Windows® 95/98/98SE/Me Only) Print Date & Time 1 - 10 PRINTER DRIVER SETTINGS (FOR WINDOWS® ONLY)
Quick Print Setup The Quick Print Setup feature allows you to quickly select driver settings. To view settings, simply click your mouse button on the task tray icon. This feature can be set to ON or OFF from the Device Options section. Administrator (For Windows® 95/98/98SE/Me Only) The administrator selection permits the Copy, Scaling and Watermark features to be locked and password protected. Note Record your password and keep it in a safe place for future reference.
Print Date & Time When enabled the Print Date and Time feature will automatically print the date and time from your computers system clock on your document. Click the Setting button to change the Date and Time Format, Position and Font. To include a background with the Date and Time select Opaque. When Opaque is selected you can set the Darkness of the Date and Time background by changing the percentage.
Accessories Tab The Accessories Tab includes the settings for configuring the printer driver for what size paper is being used for each paper source. This tab also installs any additional options into the driver settings. Paper Source Setting To configure the paper size for each paper source, highlight the source from the Paper Source Setting list. Select the Paper Size from the pull-down box and click Update. (The Paper Source Setting is used when selecting Auto Select in the Basic Tab.
Support The Support Tab provides driver version information and setting information. In addition there are links to the Brother Solution Center and Driver Update Web sites. Brother Solutions Center The Brother Solutions Center is a Web site offering information about your Brother product including FAQ’s , User Guides, Driver updates and Tips for using your machine. Check Setting The Check Setting selection displays a list of your current drivers settings.
Features in the Printer Driver (For Windows® 2000) The Windows® 2000 printer driver utilizes Microsoft’s uni-driver architecture. The following section describes the driver features and selections available for Windows® 2000. General Tab Printing Preferences In the General tab, click the Printing Preferences... button to access the Layout tab.
Layout Tab *1 *2 *1 Orientation Select the Orientation, which is how your document will be positioned on the paper (Portrait or Landscape).
*2 Pages Per Sheet You can select 1, 2, 4, 6, 9 or 16 pages to be printed on one sheet of paper. The image of each page will be reduced as needed to fit on the paper. 2 in 1 4 in 1 Paper/Quality Tab *1 *2 *1 Paper Source Possible paper sources are: Automatically Select, Auto, Upper Paper Tray, Lower Paper Tray (optional cassette #2) and Manual Feed Slot. When “Automatically Select” is chosen the machine automatically will choose the cassette with the appropriate size of paper.
*2 Media For the best print quality, select the type of media you are using: Regular Thick Paper Thicker Paper Transparency When using ordinary plain paper, select Regular. When using heavier weight paper, envelopes, or rough paper, select Thick Paper or Thicker Paper. For OHP transparencies, select Transparency. Advanced Options Click the Advanced... button in the Paper/Quality tab to access the screen below: *1 *2 *3 *1 Paper /Output Paper Size – Select the paper size of the document you are printing.
*2 Graphic Print Quality – You can change the resolution as follows: 600 × 600 dots per inch 300 × 300 dots per inch *3 Document Options Advanced Printing Features – You can Enable or Disable Advanced Printing Features from this selection. If you disable it, Page Order, Pages Per Sheet, Copy and Collate will be disabled. Halftoning – This selection is for changing the dither pattern to achieve the best print results when printing graphics.
Device Settings Tab Form To Tray Assignment – This selection assigns the paper size to each paper source. For auto paper selection (Automatically Select) to work properly, the paper size set for each source must match the actual size of paper loaded.
2 How to Print, Fax and Scan Using Apple® Macintosh® 2 For FAX-4100/4100e: Set up Your USB Equipped Apple® Macintosh® with Mac OS 8.5-9.2 Note Before you can connect the Brother machine to your Machintosh®, you must purchase a USB cable that is no longer than 6 feet (1.8 meters). To work with your Brother machine your USB Equipped Apple® Macintosh® must be set up with Mac OS 8.5-9.2 How to Print Using Brother Printer Driver To select the Printer: 1 From the Apple menu, open the Chooser.
To print the document: 3 From application software such as PaperPort®, click File menu and select Page Setup. You can change the settings for Paper Size, Orientation and Scaling, and then click OK. 4 From application software such as PaperPort, click File menu and select Print. Click Print to start printing. Note If you want to change Copies, Pages, Resolution, Paper Source and Media Type, select your settings before clicking Print. Option Setup allows you to select Duplex.
