Printer/Fax/Scanner/Copier Quick Setup Guide FAX-1820C, FAX-1920CN
Table Of Contents
- Quick Setup Guide
- Getting Started
- Table of Contents
- Setting Up the Machine
- 1 Removing the Protective Parts
- 2 Install Handset
- 3 Attaching the Paper Tray and Supports
- 4 Loading Paper
- 5 Install Phone Line and Power Cord
- 6 Installing the Ink Cartridges
- 7 Color Block Quality and Alignment Check
- 8 Setting the Date and Time
- 9 Setting Your Station ID
- 10 Selecting a Receive Mode (FAX-1820C only)
- 11 Selecting a Receive Mode (FAX-1920CN only)
- 12 Setting Up the Message Center (FAX-1920CN only)
- 13 Selecting Your Language (Canada Only)
- 14 Sending in the Product Registration and Test Sheet (USA Only)
- 15 Using the FAX as a Printer or for PC-FAX Send
- 16 Using the Network features of the FAX-1920CN
4
Setting Up the Machine
1
Remove the protective tape.
2
Open the control panel cover by pulling it
toward you (1), and then lift the top cover
toward the back (2).
3
Pull the protective yellow bar out of the
machine.
4
Close the top cover, and then close the
control panel cover.
1
Connect the curled handset cord to the
machine and the other end to the handset.
1
Removing the Protective
Parts
Do not throw away the protective yellow bar.
You will need it in the future to transport the
machine.
Control Panel Cover
Top Cover
Protective Yellow Bar
2 Install Handset