Printer/Fax/Scanner/Copier Quick Setup Guide FAX-1820C, FAX-1920CN

9
1
After the cleaning cycle is finished, the LCD
shows;
2
Make sure the paper is loaded in the paper
tray.
Press Color Start.
3
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
Step A: Color Block Quality
Check
1
The LCD shows:
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If all lines are clear and visible, press
on the dial pad to go to STEP B: Alignment
Check.
---OR---
If you can see missing short lines, press
on the dial pad and go to
3
.
3
The LCD asks you if the print quality is OK
for each color. Press or on the
dial pad.
When you have finished selecting
(YES) or (NO) for each color, the
LCD shows:
Press (YES), and then machine starts
cleaning the colors.
After cleaning is finished, press
Color Start. The machine starts printing the
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
7
Color Block Quality and
Alignment Check
Set Paper and
Press Start
Check in Step A
Check in Step B
Is Step "A" OK?
1.Yes 2.No
Black OK?
1.Yes 2.No
Start Cleaning?
1.Yes 2.No
OK Poor
Setting Up
the Machine
Using the FAX as a Printer or
for PC-FAX Send
Using the Network features of
the FAX-1920CN