Owner's Manual

S-7200C
1. CONVENIENT FUNCTION FOR SMOOTH SEWING
1
1. CONVENIENT FUNCTION FOR SMOOTH SEWING
Thread take-up amount can be adjusted Lower thread counter (When using the G50 operation panel)
INSTRUCTION MANUAL CD
10-4. Adjusting the thread take-up amount
INSTRUCTION MANUAL CD
5-7. Using the lower thread counter
When sewing heavy materials, the thread
tension can be adjusted more easily if the
thread take-up amount is set to a larger
amount. (-[][]3 specifications only)
The graphic display lights and a buzzer sounds before the
bobbin thread runs out, so that the operator can
concentrate on the job with confidence.
Easy setting of sewing speed from operation panel
< When using the G50 operation panel >
Page 21
The sewing speed can be adjusted using the
sewing speed control keys.
< When using the G10 operation panel >
INSTRUCTION MANUAL CD
8-5. Setting the maximum sewing speed
The sewing speed can be adjusted using the MAX
key.
Selectable starting speed
The sewing speed at the sewing start can be
selected in accordance with the treadle depression
amount. You can set the speed according to the
preferences of the operator.
(Contact the place of purchase.)
Condensed stitching
INSTRUCTION MANUAL CD
9-3. Sewing condensed stitches
Actuator switch
This feature is ideal for use when sewing thin
materials that can easily pucker when reverse
stitches are sewn. Condensed stitches have a
smaller sewing pitch and they help prevent fraying.
INSTRUCTION MANUAL CD
13-1. Adjusting the actuator switch
p
osition
The installation position for the actuator switch
can be adjusted to <A> or <B>. Adjust so that
it is in a position where it is easy to operate.
Floating presser foot for easy handling
INSTRUCTION MANUAL CD
13-12. Adjusting the presser foot floating amount
Maximum presser foot lift amount 16 mm
The knee lifter and the needle
up stop (reverse rotation) func-
tion together provide 16 mm of
space underneath the presser
foot. This makes it much easier
to insert and remove heavy
material without it getting caught
on the needle.
(Contact the place of purchase.)
A micro-adjustable type floating presser foot is equipped as
standard. This device is ideal for controlling presser foot
floating in materials that stretch easily and materials with
long pile. It prevents seam slippage and also prevents
damage to the material. In addition, three-dimensional
articles with irregular curves can also be handled with ease.
4314M
3721M
Sewin
g
direction
Condensed stitches
<G50 operation panel>
4316M
3165M