Owner's Manual

S-7200B

7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS)

7-2. Sewing start and end backtacking and continuous backtacking and

locking thread trimming

Thread trimming not locked Thread trimming locked

Activating setting mode

1. If the power is turned on, turn off the power switch (1)

temporarily.

2. While pressing the start backtack key (2), turn on the

power switch (1).

Switching between start and end backtacking mode and continuous backtacking mode

1. Press the start backtack key (2) so that “C” is displayed in

the top row of the stitch number display.

2. Press the end backtack key (3) to set the mode in the

bottom row of the stitch number display.

3660M

3661M

(For example 0: Start and

end backtacking mode)

0: Start and end backtacking mode

1: Continuous backtacking mode

C: Mode switching

3658M

Thread trimming is carried out

Thread trimming

is carried out

3659M

Thread trimming is not carried out.

Thread trimming is

not carried out.

(Continued on next page)