Quick Start Manual

Accessories 7
Accessories
After opening the box, check that the following accessories are included. If any item is missing or damaged,
contact your dealer.
Included accessories
The following items should also be included in the box.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.* 11. 12. 13. 14. 15. 16. 17. 18.
19. 20. 21. 22. 23. 24. 25.
26. 27.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A./
Canada
Others
U.S.A./
Canada
Others
1 Buttonhole foot “A” XC2691-053 15 Screwdriver (small) X55468-051
2 Overcasting foot “G” XC3098-051 16 Spool cap (large) 130012-054
3 Monogramming foot “N” X53840-351 17 Spool cap (medium)(2) X55260-153
4 Zipper foot “I” X59370-051 18 Spool cap (small) 130013-154
5 Zigzag foot “J” (on machine) XC3021-051 19 Extra spool pin XC4654-051
6 Blind stitch foot “R” X56409-051 20 Spool net XA5523-050
7 Button fitting foot “M” 130489-001
21 Foot controller
XD0496-051 (EU area)
8 Seam ripper X54243-051 XC6651-151 (other areas)
9 Bobbin (4) SA156 SFB (XA5539-151) 22 Operation manual XE0433-001
10 Needle set X58358-051 23 Quick reference guide XE0434-001
11 Twin needle X59296-151 24 Hard case XC9701-052
12 Cleaning brush X59476-051 25 Accessory bag XC4487-051
13 Eyelet punch 135793-001 26 Disc-shaped screwdriver XC1074-051
14 Screwdriver (large) XC8349-051 27 Stitch pattern plate XE0537-001
Note
(For U.S.A. only)
● Foot controller: Model N5V
This foot controller can be used on this machine
model NX-250.
● The screw for the presser foot holder is available
through your authorized dealer.
(Part code: XA4813-051)
● The organized accessory tray is available through
your authorized dealer.
(Part code: XC4489-051)