Owner's Manual

5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
RH-9820
41
5-3-1. Parameter list
NOTE:
It may not be possible to change some setting values or some settings may be invalid because of the settings for other parameters.
No. Setting Setting range Unit Initial value
01
Sewing speed
1,000 - 2,500 rpm 100 1,800 rpm
02 Sewing length (*1) <-00 specifications>: 5 - 50 mm
<-01 specifications>: 5 - 42 mm
<-02 specifications>
(L1422): 14 - 22 mm
(L1826): 18 - 26 mm
(L2230): 22 - 30 mm
(L2634): 26 - 34 mm
(L3442): 34 - 42 mm
0.5 <-00 specifications>: 25 mm
<-01 specifications>: 25 mm
<-02 specifications>
(L1422): 18 mm
(L1826): 22 mm
(L2230): 26 mm
(L2634): 30 mm
(L3442): 38 mm
03 Cutting space -0.3 - 0.5 mm 0.05 0.2 mm
04 Stitch pitch 0.5 - 2.0 mm 0.1 1.0 mm
05 No. of eyelet stitches 4 - 20 stitches 1 9 stitches
06 Taper bartack length 1 - 20 mm 1 6 mm
07 Offset 0.5 - 2.0 mm 0.1 1.5 mm
08 Straight bartack length 2.0 - 6.0 mm (up to 3.0 mm on one
side)
0.1 5.0 mm
*1: The sewing length setting range and initial value vary depending on the machine sub-class.
0268B - 0275
B