Owner's Manual

RH-9820
2. MACHINE SPECIFICATIONS
2
2. MACHINE SPECIFICATIONS
2-1. Specifications
Lower thread trimmer
Thread trimmer
Long type Short type
-00 O - -
-01 O O -
-02*
1
O - O
*1:
-02 specifications are divided into L1422 to L3422 specifications
depending on the sewing lengths, so please specify the sewing
length when ordering.
*2:
This is not covered by specification designations, but compatibility
is possible by replacement of gauge parts. (Ask the place of
purchase for details.)
SPECIFICATIONS RH-9820-00 RH-9820-01 RH-9820-02
Use Men’s clothes, ladies’ clothes Jeans and work clothes
Sewing speed 1,000 - 2,500 rpm (Setting possible in units of 100 rpm)
Sewing shape
Without bartack
Taper bartack
Straight bartack
Round bartack
Circular stitch
Without bartack
Taper bartack
Straight bartack
Round bartack
Circular stitch
Without bartack
Taper bartack
Straight bartack
Round bartack
Sewing length 5 - 50 mm 5 - 42 mm
L1422: 14 - 22 mm *
2
L1826: 18 - 26 mm
L2230: 22 - 30 mm
L2634: 26 - 34 mm *
2
L3442: 34 - 42 mm *
2
Stitch pitch 0.5 - 2.0 mm
Zigzag width 1.5 - 5.0 mm (Max. 4.0 mm with mechanism, Max. 1.0 mm with software)
Taper bartack length 0 - 20 mm
Work clamp height Standard 12 mm (up to 16 mm possible) 16 mm
Starting method Foot switch (treadle type, 2-pedal type) or hand start switch
Feed mechanism Intermittent feed by three pulse motors (X, Y, θ)
Needle DO x 558 80 - 120 Nm (Schmetz 558)
Safety devices
Built-in emergency stop function and automatic stopping device which stops the machine when the
safety circuit is activated
Upper shaft motor AC servo motor (4-pole, 550 W)
Air pressure
Main regulator: 0.5 MPa
Hammer pressure regulator: 0.4 MPa
Air consumption 43.2 l/min (8 cycles/min)
Power supply Single-phase 100V/220V, Three-phase 200V/220V/380V/400V 400 VA
Weight
Machine head: Approx. 120 kg, Operation panel: Approx. 0.6 kg
Control box: 14.2 - 16.2 kg (Varies depending on destination)