Owner's Manual

6. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)

RH-9820

No. Setting Setting range Unit Initial value

No. of straight bartack stitches

5 - 18 stitches 1 7 stitches

10 No. of round bartack stitches

5 - 17 stitches 1 7 stitches

11 Eyelet pattern

1 - 6

(Once the knife has been

replaced, check the knife number

for the replacement knife and then

select an appropriate eyelet

pattern.)

1 2

12 Zigzag width adjustment

-1.0 - 1.0 mm 0.1 0.0 mm

13 Eyelet deceleration speed (*2)

-600 - 0 rpm 100 0 rpm

14 Straight bartack speed (*3)

1,000 - 2,500 rpm 100 1,800 rpm

15 Number of slow start stitches

0 - 3 stitches 1 0 stitches

16 Slow start speed (*4)

400 - 1,500 rpm 100 700 rpm

*2: The standard eyelet deceleration speed is the value that has been set by parameter No. 01 (sewing speed).

*3: If the sewing speed is set to a speed that is slower than the straight bartack speed, the straight bartack speed used for sewing will be the

same as the normal sewing speed.

*4: If the sewing speed is set to a speed that is slower than the slow start speed, the slow start speed used for sewing will be the same as

the normal sewing speed.

0276B - 0283