Owner's Manual

4. INSTALLATION
RH-9820
10
4-4-2. When embedding into the table
(1) Bed support plates [4 pcs.]
(2) Bolts [16 pcs.]
* Install so that they are horizontal to
the bed base.
NOTE:
• When placing the machine head
onto the table, have four or more
people hold the machine head by the
places indicated by the
locations
in the illustration.
• Do not hold by the head support
lever (3).
(4) Rubber sheets [4 pcs.]
(5) Bolts [4 pcs.]
(6) Washers (large) [4 pcs.]
(7) Nuts [4 pcs.]
After installing the machine head,
remove the fixing bolts (8) and washers
(9).
NOTE:
The fixing bolts (8) and washers (9)
are needed when moving the
machine head, so store them in a
safe place.
0348B
0349B
(rear)
0347B