Owner's Manual

4. INSTALLATION

RH-9820

4-3. Installing the table reinforcement plates (embedded installation only)

(1) L-shaped reinforcement plates

[2 pcs.]

(2) Bolts [10 pcs.]

(3) Plain washers [10 pcs.]

(4) Spring washers [10 pcs.]

(5) Nuts [10 pcs.]

4-4. Installing the machine head

4-4-1. When setting up on top of the table

Before installing the machine head, install the three treadle

mounting bolts (A) to the table.

* Insert the bolts (A) securely so that their heads do not

protrude out from the top of the table.

(Refer to “4-12. Installing the treadle unit (when using the

treadle)”.)

Table

(Continued on next page)

0342B

0343B