Application Guide
Table Of Contents
- User’s Guide DS-620 / DS-720D
- Using the documentation
- Trademarks
- Table of Contents
- 1 General Information
- 2 Installing the Scanner Driver and Scanning Software
- 3 Document Specifications
- 4 Scan Preparation
- 5 Scanning Applications and Settings
- Choosing your scanning software
- Using DSmobileCapture (for Windows®)
- Changing DSmobileCapture scan settings (for Windows®)
- Using DSmobileCapture (for Macintosh)
- Changing DSmobileCapture scan settings (for Macintosh)
- Using Button Manager V2 (for Windows®)
- Scan buttons in the Button Manager V2 Button Panel (for Windows®)
- 6 Scanner Calibration
- 7 Scanner Maintenance
- 8 Troubleshooting
- Appendix A
- Appendix B
39
7
7
IMPORTANT
Do not use any solvents or corrosive liquid, such as alcohol, kerosene, etc., to clean any part of the scanner,
or the plastic may be permanently damaged.
Cleaning the outside of your scanner
To prevent dust accumulation, we recommend cleaning the exterior of your scanner periodically.
a Remove the Micro USB Cable from both your scanner and your computer.
b Wipe the outside of the scanner with a dry, soft, lint-free cloth.
If necessary, wipe the exterior with a cloth lightly dampened with water or diluted detergent, and finish
with a dry cloth.
c Reconnect the Micro USB Cable to your scanner and your computer.
Cleaning the inside of your scanner
To maintain the scanned image quality, clean the interior of your scanner periodically. If vertical lines or stripes
appear on scanned images, this indicates that it is time to clean your scanner.
a Remove the Micro USB Cable from both your scanner and your computer.
b Open the scanner’s top cover.
Scanner Maintenance 7