Application Guide
Table Of Contents
- User’s Guide DS-620 / DS-720D
- Using the documentation
- Trademarks
- Table of Contents
- 1 General Information
- 2 Installing the Scanner Driver and Scanning Software
- 3 Document Specifications
- 4 Scan Preparation
- 5 Scanning Applications and Settings
- Choosing your scanning software
- Using DSmobileCapture (for Windows®)
- Changing DSmobileCapture scan settings (for Windows®)
- Using DSmobileCapture (for Macintosh)
- Changing DSmobileCapture scan settings (for Macintosh)
- Using Button Manager V2 (for Windows®)
- Scan buttons in the Button Manager V2 Button Panel (for Windows®)
- 6 Scanner Calibration
- 7 Scanner Maintenance
- 8 Troubleshooting
- Appendix A
- Appendix B
Scanning Applications and Settings
13
5
e Change the scanning settings, if needed.
For more information on changing settings, see Changing DSmobileCapture scan settings (for Windows
®
)
on page 14.
f Insert a document into your scanner.
g Click Scan . Your scanner starts scanning.
A thumbnail of the scanned image appears in the DSmobileCapture screen and the scanned image will
be saved in the directory you specified in step 5.
Check the scan result just in case.
h For continuous scanning, insert the next document into the scanner while Waiting for next job... screen
appears. When the document is inserted, scanning will start automatically.
To stop the continuous scanning, click Cancel on Waiting for next job... screen.
NOTE
• To change the time delay when waiting for the next job, see Paper settings on page 16.
• To save multiple documents as one file, choose Multi-page PDF or Multi-page TIFF from the File Format
drop-down list.