Printer/Fax/Scanner/Copier Specifications Sheet

Photo 32
Photo 33
N
eed help with a particular remanu-
facturing problem?
Call the Technical Resource Center from
8am - 5pm PST: 800 394.9900
Photo 30
S
tep 27
Pull the drive gear end of the developer
roller out of the cartridge again. Install the
c
ontact end gear onto the developer
roller axle. Place the contact bar back onto
the developer roller.
(See Photo 30)
Step 28
Install the developer roller bearing, drive
gear and the large white gear onto the
end of the cartridge. Place the metal gear
housing end plate onto the cartridge and
install the screw that holds the end plate
in place.
(See Photo 31)
St
ep 29
Clean the corona wire using a cotton
swab and alcohol.
(See Photo 32)
Photo 31
St
ep 30
P
lace the drive gear ont
o the drum and
install the dr
um in
t
o the c
ar
tr
idge
.
(See Phot
o 33)
Step 31
Slide the drum axle through the drum
starting on the contact side. Install the
drum axle locking hub onto the drum
axle
. Rotate the hub clock-wise to lock the
hub in position.
(See Photo 34)
Brother DR-250 Technical Instruction 7
P
hoto 34
Notes