User`s guide

102
No Tray The paper tray indicated on the
Touchscreen is not installed or
not installed correctly.
Reinstall the paper tray indicated on the
Touchscreen.
No Waste Toner The waste toner box is not
installed correctly.
Reinstall the Waste Toner Box, (see the steps
in Replacing the waste toner box on page 70).
Out of Memory The machine’s memory is full. Copy operation in progress
Do one of the following:
 Press Partial Print or Quit to copy
the scanned pages.
 Press and wait until the other
operations in progress finish, and then try
again.
 Add optional memory (see Advanced
User’s Guide).
Print operation in process
Do one of the following:
 Reduce the print resolution
(see Software and Network User's Guide).
 Add optional memory (see Advanced
User’s Guide).
Print Data Full The machine’s memory is full.
 Press and delete the previously stored
secure print jobs.
 Add optional memory (see Advanced
User’s Guide).
Print Unable XX The machine has a mechanical
problem.
Do one of the following:
 Press and hold down to turn the
machine off, wait a few minutes, and then
turn it on again.
 If the problem continues, contact Brother
customer service for support.
Error Message Cause Action