Operation Manual

Sending a fax (MFC models only)
25
3
Restoring all fax settings to
the factory settings 3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c After changing the last setting, swipe up
or down, or press a or b to display
Factory Reset.
d Press Factory Reset.
e The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
f Press .
Saving fax options as a
Shortcut 3
You can store all the new fax options you use
frequently by saving them as a Shortcut.
a Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Enter the fax number.
c Press Options.
d Swipe up or down, or press a or b to
display Fax Resolution, 2-sided
Fax, Contrast, Real Time TX,
Overseas Mode or Glass Scan
Size, and then press the setting you
want to change. Then press the new
option you want.
Repeat this step for each setting you
want to change.
e When you have finished choosing new
options, press OK.
f Press Save as Shortcut.
g Confirm the displayed list of options you
chose for the Shortcut, and then
press OK.
h Press a tab from 1 to 8.
i Press where you have not added a
Shortcut.
j Enter a name for the Shortcut using the
Touchscreen's keyboard. (To help you
enter letters, see Basic User's Guide.)
Press OK.
k Press OK to confirm.