Operation Manual

Sending a fax (MFC models only)
17
3
Changing a 2-sided fax layout 3
You must choose a 2-sided scanning format
before you send a 2-sided fax. The format
you choose will depend on the layout of your
2-sided document.
a Load your document in the ADF.
b Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display 2-sided Fax.
e Press 2-sided Fax.
f Do one of the following:
 If your document is flipped on the
Long edge, press 2-sided Scan:
Long Edge.
 If your document is flipped on the
Short edge, press 2-sided Scan:
Short Edge.
Long edge
Portrait Landscape
Short edge
Portrait Landscape