Operation Manual

Chapter 1
4
Deep Sleep mode 1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a job or if you press
the Touchscreen.
When the machine is in Deep Sleep mode,
the Touchscreen backlight turns off and
blinks.
Auto Power Off (DCP models
only) 1
If the machine is in Deep Sleep mode for a
certain length of time, it will go into Power Off
mode. To start printing, press on the
Touchpanel, and then send the print data.
You can choose how long the machine must
be in Deep Sleep mode before it goes into
Auto Power Off mode, by following these
steps:
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Ecology.
f Press Ecology.
g Press Auto Power Off.
h Choose the length of time Off, 1hour,
2hours, 4hours or 8hours the
machine will remain idle before entering
Auto Power Off mode.
i Press .
Quiet mode feature 1
Quiet mode 1
The Quiet mode setting can reduce noise
while printing. When Quiet Mode is turned On,
the print speed becomes slower. The default
setting is Off.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Ecology.
f Press Ecology.
g Press Quiet Mode.
h Press On or Off.
i Press .