Operation Manual

Table Of Contents
Difficulties Suggestions
Sent faxes are blank. Make sure you are loading the document correctly.
See Related Information: Load Documents in the Automatic Document Feeder
(ADF).
See Related Information: Load Documents on the Scanner Glass.
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip.
See Related Information: Clean the Scanner.
Related Information
If You Are Having Difficulty with Your Machine
Set Dial Tone Detection
Telephone Line Interference/VoIP
Troubleshooting
Set Tone or Pulse Dialling Mode
Choose the Correct Receive Mode
Set Fax Detect
Set the Number of Rings Before the Machine Answers (Ring Delay)
Connect an External TAD
External TAD (Telephone Answering Device)
Set the Telephone Line Type
Print Reports
Clean the Scanner
Turn Off Memory Receive
Print a Fax Stored in the Machine's Memory
Cancel a Fax in Progress
Check and Cancel a Pending Fax
Load Documents in the Automatic Document Feeder (ADF)
Load Documents on the Scanner Glass
441