Operation Manual

Table Of Contents
Home > Fax > Send a Fax > Fax Polling > Polled Transmit > Set Up Secure Polling
Set Up Secure Polling
Related Models: MFC-J985DW
Use the Secure Polling feature to restrict access to the documents you set up to be polled.
This feature is available only for monochrome faxes.
Secure Polling works only with Brother fax machines. To retrieve a fax from your machine, someone must
enter the secure code.
1. Load your document.
2. Press [Fax].
(MFC-J985DW)
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
3. Press [Options] > [Polled TX].
4. Press [Secure].
5. Enter the four-digit secure code using the touchscreen. Press [OK].
6. Press [Fax Start].
7. If you are using the scanner glass, the touchscreen prompts you to select one of the following options:
Press [No] when finished scanning pages.
Press [Yes] to scan another page. Place the next page on the scanner glass, and then press [OK].
Repeat this step for each additional page.
8. Your machine automatically sends the fax when it is polled.
Related Information
Polled Transmit
219