User`s guide

Chapter 7
22
Enlarging or reducing copies 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust to the size you set in
Paper Size.
(MFC-J200)
7
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e Press a or b to choose the enlargement
or reduction ratio you want.
Press OK.
NOTE
If you chose Custom(25-400%), enter
an enlargement or reduction ratio from
25% to 400%.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
(DCP-J100 and DCP-J105)
7
a Load your document.
b Enter the number of copies you want.
c Press Enlarge/Reduce.
d Press a or b to choose the enlargement
or reduction ratio you want. Press OK.
NOTE
If you chose Custom(25-400%), press a
or b repeatedly to enter an enlargement or
reduction ratio from 25% to 400%.
e Press Mono Start or Colour Start.
NOTE
• Page Layout is not available with
Enlarge/Reduce - MFC-J200
(Enlarge/Reduce - DCP-J100 and
DCP-J105).
• Page Layout, Sort and
Remove Bkg. Clr are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper-left
corner, with the document face down on
the scanner glass.
• Fit to Page is not available when
using the ADF
1
.
1
MFC models only
198% 10x1 5cmiA4
186%10x15cmiLTR
141% A5 iA4
100%
97% LTR iA4
93% A4 iLTR
83% LGL iA4
69% A4 iA5
47% A4 i10x15cm
Fit to Pa ge
Custom(25-400%)
198% 10 x15cmiA4
186%10x15cmiLTR
141% A5 iA4
100%
97% LTR iA4
93% A4 iLTR
83%
69% A4 iA5
47% A4 i10x15cm
Fit to Page
Custom(25-400%)