User`s guide

Chapter 3
8
Changing the fax resolution 3
The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.
To change the fax resolution for the
next fax
3
a Load your document.
b Press (FAX).
c Press Fax Resolution then a or b to
choose the resolution.
Press OK.
d Enter the fax number.
e Press Mono Start or Colour Start.
To change the default fax resolution 3
a Load your document.
b Press (FAX).
c Press Menu, 3, 2, 1.
d Press a or b to choose the resolution
you want.
Press OK.
e Press 2 so you can continue sending
your fax.
f Enter the fax number.
g Press Mono Start or Colour Start.
NOTE
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than
Fine resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. Transmits a little
slower than Standard
resolution.