User`s guide

Clean Unable XX

Init Unable XX

Print Unable XX

Scan Unable XX

The machine has a mechanical

problem.

Open the scanner cover and remove

any foreign objects and paper scraps

from inside the machine. If the error

message continues, disconnect the

machine from the power for several

minutes and reconnect it.

A foreign object, such as a paper clip

or a piece of ripped paper, is in the

machine.

Close Ink Cover The ink cartridge cover is not locked

in the closed position.

Firmly close the ink cartridge cover

until it locks into place.

Cover is Open The scanner cover is not locked in the

closed position.

Lift the scanner cover, and then close

it again.

Make sure the USB cable (if used)

has been guided correctly through the

cable channel and out the back of the

machine.

Data Remaining Print data is left in the machine's

memory.

Press Stop/Exit. The machine will

cancel the job and clear it from the

memory. Try to print again.

High Temperature The room temperature is too high. After lowering the room temperature,

allow the machine to cool down to

room temperature and then try again.

Error Message Cause Action