Quick Start Manual
Table Of Contents
- Quick Setup Guide DCP-J100 DCP-J105
- Start Here
- For Windows® USB interface users (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8)
- For Macintosh USB interface users (Mac OS X v10.6.8, 10.7.x, 10.8.x)
- For wireless network interface users (DCP-J105 only)
- 11 Before you begin
- 12 Choose your wireless setup method
- 13 Setup using the CD-ROM (Windows® and Macintosh)
- 13 Manual setup from the control panel using the Setup Wizard (Windows®, Macintosh and mobile devices)
- 13 One-push setup using WPS or AOSS™ (Windows®, Macintosh and mobile devices)
- Install the drivers and software (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8)
- Install the drivers and software (Mac OS X v10.6.8, 10.7.x, 10.8.x)
- Install Optional Applications Windows®
- For Network Users
- Other Information
- brother CEE-ENG
5
f Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
g Close the output paper tray cover.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
7
Check the print quality
a When the preparation process has finished, the
LCD shows this message
Set Paper and
q
Press Start
Press Colour Start.
b Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press a (Yes) to
finish the quality check and go to the next step.
If lines are missing, press b (No) and follow the
steps on the LCD.
8
Set the date and time
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality.
a When the LCD shows this message, press OK.
Date&Time
q
Enter & OK Key
b Press a or b to enter the last two digits of the
year, and then press OK.
c Repeat for the Month and Day, and then Hours
and Minutes in 24-hour format.
NOTE
You can change the date and time if needed. For
more information uuBasic User’s Guide: Setting
the date and time