Quick Start Manual

22
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below:
a Make sure the machine is idle.
b Press Menu.
c Press a or b to choose 3.Network.
Press OK.
d Press a or b to choose 0.Network Reset.
Press OK.
e Press a to choose Reset.
f Press a to choose Yes.
g The machine will restart, and the reset is complete.
Entering Text for Wireless Settings
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}~
Press Enlarge/Reduce or Number of Copies to move the cursor left or right.
NOTE
Making corrections
If you entered an incorrect letter and want to change it, press Enlarge/Reduce or Number of Copies to
position the cursor under the incorrect letter. Use a and b to change to the correct letter, then press Number
of Copies repeatedly to move the cursor back to the end of the text. If you press Stop/Exit, all letters above
and to the right of the cursor will be deleted.