Quick Start Manual
Table Of Contents
- Quick Setup Guide DCP-J100 DCP-J105
- Start Here
- For Windows® USB interface users (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8)
- For Macintosh USB interface users (Mac OS X v10.6.8, 10.7.x, 10.8.x)
- For wireless network interface users (DCP-J105 only)
- 11 Before you begin
- 12 Choose your wireless setup method
- 13 Setup using the CD-ROM (Windows® and Macintosh)
- 13 Manual setup from the control panel using the Setup Wizard (Windows®, Macintosh and mobile devices)
- 13 One-push setup using WPS or AOSS™ (Windows®, Macintosh and mobile devices)
- Install the drivers and software (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7/Windows® 8)
- Install the drivers and software (Mac OS X v10.6.8, 10.7.x, 10.8.x)
- Install Optional Applications Windows®
- For Network Users
- Other Information
- brother CEE-ENG
2
2
Changing the control
panel (if needed)
a Remove the original control panel from the
machine with both hands. Then attach the
control panel of your chosen language.
3
Connect the power cord
WARNING
The machine must be fitted with an earthed
plug.
a Connect the power cord.
4
Choose your language
a When the LCD shows this message, press OK.
Select Language
q
Press OK Key
b Press a or b to choose your language and
press OK.
c Press a (Yes) to confirm the language setting.
NOTE
DO NOT connect the USB cable yet (if you are
using a USB cable).
NOTE
• The Warning LED on the control panel will stay
on until you have installed the ink cartridges.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.