All in One Printer User Manual
Table Of Contents
- BASIC USER’S GUIDE DCP-9055CDN
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Making copies
- 5 How to print from a computer
- 6 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- Error and maintenance messages
- Document is jammed in the top of the ADF unit
- Document is jammed under the document cover
- Removing small documents jammed in the ADF
- Document is jammed at the output tray
- Paper is jammed in the MP tray
- Paper is jammed in the Paper Tray 1 or Tray 2
- Paper is jammed at the back of the machine
- Paper is jammed inside the machine
- Paper is jammed underneath paper tray 1
- Troubleshooting
- Machine Information
- Error and maintenance messages
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ/SAF/GLF

Loading paper
21
2
Paper capacity of the paper trays 2
1
Legal or Folio size paper are not available in some regions.
2
Folio size is 215.9 mm x 330.2 mm.
Recommended paper specifications 2
The following paper specifications are suitable for this machine.
Use paper made for plain paper copying.
Use paper that is 75 to 90 gsm.
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, Legal
1
, B5,
Executive, A5,
A5 (Long Edge), A6,
B6, Folio
2
Plain paper, Thin paper
and Recycled paper
up to 250 [80 gsm]
Multi-purpose Tray
(MP Tray)
Width: 69.8 to 216 mm
Length: 116 to 406.4 mm
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Bond paper,
Recycled paper,
Envelopes, Labels and
Glossy paper
50 sheets [80 gsm]
3 Envelopes
1 Glossy paper
Optional lower Tray
(Tray 2)
A4, Letter, Legal, B5,
Executive, A5, B6,
Folio
2
Plain paper, Thin paper
and Recycled paper
up to 500 [80 gsm]
Basis weight 75-90 gsm
Thickness 80-110 μm
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%










