User`s guide

Control panel setup
11
3
Ethernet 3
Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T
full or half duplex mode by auto negotiation.
Note
If you set this value incorrectly, you may not be able to communicate with your print server.
Status (For DCP-9055CDN and MFC-9465CDN) 3
This field displays the current wired network status.
MAC Address 3
The MAC address is a unique number assigned for the machine's network interface. You can check your
machine's MAC address from the control panel.
How to set a new default for Scan to FTP 3
You can choose the default color and file type for the Scan to FTP function. (For how to operate Scan to FTP,
see Network Scanning in the Software User's Guide.)
How to set a new default for Scan to Network 3
You can choose the default color and file type for the Scan to Network function to scan a document directly
to a server supporting CIFS on your local network or on the internet. (For the CIFS protocol, see the Network
Glossary.) (For how to operate Scan to Network, see Network Scanning in the Software User's Guide.)