Setting Up the machine Windows® USB Step 1 Windows® Parallel Setting Up the machine Step 2 Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for quick and easy reference at all times. Windows NT® 4.0 Parallel USB Setup is Complete! Installing the Drivers & Software Installing the Drivers & Software Macintosh® Quick Setup Guide DCP-8060 Before you can use the machine, you must set up the hardware and install the software.
Warning Caution Improper Setup Note User’s Guide Warnings tell you what to do to prevent possible personal injury. Cautions specify procedures you must follow or avoid to prevent possible damage to the machine or other objects. Improper Setup icons alert you to devices and operations that are not compatible with the machine. Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features.
■ Getting Started Carton Components 1 2 8 7 3 4 6 Quick Setup Guide 5 1. Automatic Document Feeder (ADF) 2. Control Panel 3. Face-down Output Tray Support Flap (Support Flap) 4. Front Cover 5. Paper Tray 6. Power Switch 7. Document Cover 8. ADF Document Output Support Flap CD-ROM AC Power Cord Drum Unit Assembly (including Toner Cartridge) User’s Guide Carton components may differ from one country to another. Save all packing materials and the carton.
Control Panel DCP-8060 1 9 2 3 4 8 7 5 6 1 Status LED 2 LCD (Liquid Crystal Display) 3 Menu keys 4 Dial Pad 5 Stop/Exit key 6 Start key 7 Copy keys 8 Scan key 9 Print keys For the details of the control panel, see "Control panel overview" in Chapter 1 of the User’s Guide.
Table of Contents Setting Up the machine Step 1 1. 2. 3. 4. 5. Step 2 Install the Drum Unit and Toner Cartridge Assembly ................................... 4 Load Paper in the Paper Tray .......................................................................... 5 Release the Scanner Lock ............................................................................... 6 Connect the Power Cord .................................................................................. 6 Setting the LCD Contrast ....
Step 1 Setting Up the machine 1 Install the Drum Unit and Toner Cartridge Assembly Do not connect the interface cable. Connecting the interface cable is done during the software installation process. 1 2 Unpack the drum unit and toner cartridge assembly. 3 Gently rock it from side to side several times to distribute the toner evenly inside the cartridge. 4 Put the drum unit and toner cartridge into the machine so that it clicks into place. 5 Close the front cover of the machine.
Pull the paper tray completely out of the machine. 4 Put paper in the paper tray. Check that the paper is flat in the tray and below the maximum paper mark (1). Windows® USB 1 Setting Up the machine 2 Load Paper in the Paper Tray While pressing the blue paper guide release lever (1), slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. 5 Windows NT® 4.
Step 1 3 1 Setting Up the machine Release the Scanner Lock Push the lever (1) in the direction shown to unlock the scanner. (The gray scanner lock lever is located at the back left side, under the document cover (2).) 4 Connect the Power Cord Do not connect the Parallel or USB cable yet. 1 Make sure that the power switch is off. Connect the AC power cord to the machine. 2 Plug the AC power cord into an AC outlet. Turn the power switch on.
Setting Up the machine 5 Setting the LCD Contrast You can change the contrast to help the LCD look lighter or darker. Press Menu. Press 1. Windows® USB Press 6. Windows NT® 4.0 Parallel Windows® Parallel Press to increase the contrast. —OR— Press to decrease the contrast. Press OK.
Step 2 Installing the Drivers & Software Supplied CD-ROM “MFL-Pro Suite” The CD-ROM includes the following items: Install MFL-Pro Suite You can install the MFL-Pro Suite and multifunction drivers. Install Optional Applications You can install additional MFL-Pro Suite software utilities. Documentation View the User’s Guide and other document in PDF format (Viewer included). The User’s Guide on the CD-ROM includes the Software and Network User’s Guide for features available when connected to a computer (e.
Step 2 Installing the Drivers & Software Setting Up the machine Follow the instructions on this page for your operating system and interface cable. For the latest drivers and to find the best solution for your problem or question, access the Brother Solutions Center directly from the driver or go to http://solutions.brother.com Windows® USB USB Interface Cable Users ..........................................
Step 2 Installing the Drivers & Software For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7. Please close any applications running before installing the MFL-Pro Suite. 1 Turn on your computer. (For Windows® 2000 Professional/XP/ XP Professional x64 Edition, you must be logged on with Administrator rights.
Setting Up the machine When this screen appears, connect the USB interface cable to your PC, and then connect it to the machine. It will take a few seconds for the installation screens to appear. The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait, it will take a few seconds for all the screens to appear. (For Windows® XP) Windows® USB 7 DO NOT try to cancel any of the screens during this installation.
Step 2 Installing the Drivers & Software For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7. Please close any applications running before installing the MFL-Pro Suite. 1 Turn on your computer. (For Windows® 2000 Professional/XP/ XP Professional x64 Edition, you must be logged on with Administrator rights.
When this screen appears, connect the parallel interface cable to your PC, and then connect it to the machine. 9 Setting Up the machine 7 For Windows® 98/98SE/Me/ 2000 Professional users, click Next. (For Windows® XP) (For Windows® 98/98SE/Me/2000) Windows® Parallel Windows® XP users should wait for a while; installation of the Brother drivers will start automatically. The installation screens appear one after another.
Step 2 Installing the Drivers & Software For Parallel Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) A After the computer restarts, the installation of the Brother drivers will automatically start. Follow the instructions on the screen. (For Windows® 2000 Professional/XP/ XP Professional x64 Edition, you must be logged on with Administrator rights.) After restarting the computer, the Installation Diagnostics will run automatically.
Setting Up the machine For Windows NT® Workstation Version 4.0 Users Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7. Switch off the machine and disconnect the machine from the power socket. 2 Turn on your computer. You must be logged on with Administrator rights. Put the supplied CD-ROM into your CDROM drive. If the model name screen appears, choose your machine. If the language screen appears, select your language.
Step 2 Installing the Drivers & Software For Windows NT® Workstation Version 4.0 Users 7 When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. 8 Choose Standard, and then click Next. The installation will continue. If you want to install the PS driver (BR-Script 3 printer driver), choose Custom Install and then follow the on-screen instructions.
For USB Interface Cable Users Setting Up the machine F For Mac OS® X 10.2.4 or greater Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 7. For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com) Follow the on-screen instructions, and restart your Macintosh®.
Step 2 Installing the Drivers & Software For USB Interface Cable Users DO NOT connect the machine to a USB port on a keyboard or a nonpowered USB hub 8 A Double-Click the Utilities folder. B Double-Click the Printer Setup Utility icon. Plug in the power cord and turn on the machine. For Mac OS® 10.2.x users, double-click the Print Center icon. C 9 Click Add. Choose USB and then click OK. For Mac OS® X 10.2.4 to 10.3.x users ➝ Go to D 0 18 Click Go, then choose Applications.
Setting Up the machine D Choose USB. E Choose your model name, and then click Add. For Mac OS® X 10.2.4 to 10.3 users: G To install Presto!® PageManager®, click the Presto! PageManager icon and follow the on-screen instructions. When Presto!® PageManager® is installed OCR capability is added to the Brother ControlCenter2. You can easily scan, share, and organize photos and documents using Presto!® PageManager®. Presto!® PageManager® has been installed and the installation is now complete.
■ Options and Consumables Options The machine has the following optional accessories. You can expand the capabilities of the machine by adding these items. Lower Tray Unit Memory LT-5300 Second lower paper tray unit expands total input capacity up to 500 sheets. You can expand the memory by installing a (144-pin DIMM) memory module. For more details, see “Memory Board” in Appendix of the User’s Guide.
Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. © 2006 Brother Industries, Ltd. All rights reserved. Windows, Microsoft and Windows NT are registered trademarks of Microsoft in the U.S. and other countries. Macintosh is a registered trademark of Apple Computer, Inc.
ENG
