Owner's Manual
Table Of Contents
- Top Page
- Network User’s Guide
- USER'S GUIDE DCP-8040 DCP-8045D
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-screen programming
- 4 Getting started
- 5 Making copies
- 6 Using the DCP as a printer
- 7 Printer driver settings
- 8 How to scan using Windows®
- Scanning a document
- Scanning a document (For Windows® XP only)
- Using the scan key (For USB or Parallel interface cable users)
- Using ScanSoft® PaperPort® and OmniPage® OCR
- 9 Using the Brother Control Center (For Windows® 98/98SE/Me/2000 Professional and Windows NT® WS 4.0)
- 10 Using the Windows®-Based Brother SmartUI Control Center (For Windows® XP)
- 11 Using your DCP with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 8.6 - 9.2)
- Using the Brother Printer Driver with Your Apple® Macintosh® (Mac OS® X)
- Using the PS driver with your Apple® Macintosh®
- Using the Brother TWAIN scanner driver with your Macintosh®
- Using Presto!® PageManager®
- 12 Network Scanning (Windows® 98/98SE/Me/2000 Professional and XP only)
- 13 Important information
- 14 Troubleshooting and routine maintenance
- 15 Optional accessories
- Glossary
- Specifications
- Index
- brother USA
HOW TO SCAN USING WINDOWS
®
8 - 8
Document Size
Set the Size to one of the following:
■
Letter (8 1/2
×
11 in.)
■
A4 (210
×
297 mm)
■
Legal (8 1/2
×
14 in.)
■
A5 (148
×
210 mm)
■
B5 (182
×
257 mm)
■
Executive (7 1/4
×
10 1/2 in.)
■
Business Card (90
×
60 mm)
■
Photo 3.5
×
5 in. (9
×
13cm)
■
Photo 5
×
7 in. (13
×
18cm)
■
APS C 4
×
6 in. (10
×
15cm)
■
Custom (User adjustable from 0.35
×
0.35 in. to 8.5
×
14 in or
8.9
×
8.9 mm to 215.9
×
355.6 mm.)
To scan photographs or business cards, select the document size,
and then place the document face down at the center of scanner glass.
When scanning photographs or other images for use in a word processor
or other graphics application. You should try different settings for the
contrast and resolution modes to see which best suits your needs.
If you selected Custom as the size, The Custom Document Size
dialog box will appear.
Type the Name, Width and Height for the document.
You can choose “mm” or “inch” as the unit for Width and Height.