User Manual
Table Of Contents
- BASIC USER’S GUIDE DCP-7060D/DCP-7065DN/HL-2280DW
- Brother numbers
- Ordering accessories and supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- Compilation and Publication Notice
- Brother® One-Year Limited Warranty and Replacement Service (USA Only)
- BROTHER MULTIFUNCTION CENTER® / FAX MACHINELIMITED WARRANTY (Canada only)
- User’s Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Making copies
- 5 How to print from a computer
- 6 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother USA/CAN
Loading paper
17
2
Paper capacity of the paper trays 2
1
Legal or Folio size paper is not available in some regions outside the USA and Canada.
2
Folio size is 8.5 in. 13 in. (215.9 mm x 330.2 mm)
Recommended paper specifications 2
The following paper specifications are
suitable for this machine.
Use paper made for plain paper copying.
Use paper that is 20 to 24 lb (75 to 90 g/m
2
).
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Paper size Paper type No. of sheets
Paper Tray
(Tray 1)
Letter, Legal
1
,
Executive, A4, A5, A5
(Long Edge), A6, B5, B6,
Folio
12
Plain paper, Thin paper
and Recycled paper
up to 250
[20lb(80g/m
2
)]
Manual feed slot
(Manual)
Width: 3.0 to 8.5 in. (76.2
to 216 mm)
Length: 4.6 to 16 in. (116
to 406.4 mm)
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Bond paper,
Recycled paper,
Envelopes and Labels
Single sheet
[20lb(80g/m
2
)]
Basis weight
20-24 lb (75-90 g/m
2
)
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%










