Installation Instructions

23
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
One push configuration using Wi-Fi Protected Setup or AOSS™
(Windows
®
and Macintosh)
10
Configure the wireless
settings
a Confirm your wireless access point/router has
the Wi-Fi Protected Setup or AOSS™ symbol
as shown below.
b Place the Brother machine within range of your
Wi-Fi Protected Setup or AOSS™ access
point/router. The range may differ depending
on your environment. Refer to the instructions
provided with your access point/router.
c (For DCP-7055W / DCP-7057W) On your
machine, press Menu and press a or b to
choose 3.Network, and press OK. Press a or
b to choose 3.WPS/AOSS, and press OK.
(For DCP-7070DW) On your machine, press
Menu and press a or b to choose 4.Network,
and press OK. Press a or b to choose 2.WLAN,
and press OK. Press a or b to choose
3.WPS/AOSS, and press OK.
When WLAN Enable ? is displayed, press a
to choose On. This will start the wireless setup
wizard.
Otherwise press Stop/Exit to exit from the
wireless setup wizard.
When Start WPS/AOSS on your
wireless access point/router.
appears, press the Wi-Fi Protected Setup or
AOSS™ button on your wireless access
point/router. See the user’s guide for your
wireless access point/router for instructions.
And then press OK.
This feature will automatically detect which mode
(Wi-Fi Protected Setup or AOSS™) your access
point/router uses to configure your machine.
d A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
Troubleshooting on page 24.
To install the MFL-Pro Suite, continue to
step 11.
For Windows
®
Users:
Now go to
page 28
For Macintosh Users:
Now go to
page 30
Note
If your wireless access point/router supports
Wi-Fi Protected Setup (PIN Method) and you
want to configure your machine using the PIN
(Personal Identification Number) Method, see
Using the PIN Method of Wi-Fi Protected Setup in
the Network User's Guide.
Wireless setup is now complete.