User`s guide

Menu and features
91
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
3.Network
(For
DCP-7055W /
DCP-7057W)
1.TCP/IP 1.Boot
Method
— Auto*
Static
RARP
BOOTP
DHCP
Chooses the Boot method
that best suits your needs.
2.IP Address — [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3.Subnet
Mask
— [000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet mask.
4.Gateway — [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway address.
5.Node Name — BRWXXXXXXXXXXXX Enter the Node name.
6.WINS
Config
— Auto*
Static
Chooses the WINS
configuration mode.
7.WINS
Server
— Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP address of
the primary or secondary
WINS server.
8.DNS Server — Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP address of
the primary or secondary
DNS server.
9.APIPA — On*
Off
Automatically allocates the
IP address from the link-local
address range.
0.IPv6 — On
Off*
Enable or Disable the IPv6
protocol. If you want to use
the IPv6 protocol, visit
http://solutions.brother.com/
for more information.
2.Setup
Wizard
— — — You can configure your print
server.
3.WPS/AOSS — — — You can easily configure
your wireless network
settings using the one-button
push method.
4.WPS w/PIN
Code
— — — You can easily configure
your wireless network
settings using WPS with a
PIN code.
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.