User`s guide

Chapter C
94
4.Network
(For
DCP-7070DW)
(Continued)
1.Wired LAN
(Continued)
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link mode.
3.Wired
Status
— Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired status.
4.MAC
Address
— — Shows the MAC
address of the
machine.
5.Set to
Default
— 1.Reset
2.Exit
Restore the wired
network setting to
factory default.
6.Wired
Enable
— On*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot
Method
Auto*
Static
RARP
BOOTP
DHCP
Chooses the Boot
method that best
suits your needs.
2.IP Address [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3.Subnet
Mask
[000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet
mask.
4.Gateway [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway
address.
5.Node Name BRWXXXXXXXXXXXX Enter the Node
name.
6.WINS
Config
Auto*
Static
Chooses the WINS
configuration mode.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.