Service manual

3-74
Confidential
(5) Disconnect the connector of the NCU harness ASSY from the main PCB ASSY.
(6) Remove the NCU harness ASSY from the guide.
(7) Remove the two taptite bind B M4x12 screws, and remove the NCU shield.
Fig. 3-59
CN21
Main PCB ASSY
Taptite bind B M4x12
NCU shield
Connector
(NCU harness ASSY)
Main PCB ASSY
Guide
Connector
(NCU harness
ASSY)
7
5
7