Service manual

3-52
Confidential
9.10.8 Separation Rubber Holder ASSY
(1) Release the pins to remove the separation rubber holder ASSY.
(2) Remove the ADF spring.
Fig. 3-36
Assembling Note:
• Noise may be caused if the front edge of the support film is not within the upper
document chute ASSY SX.
Check that there is the front edge of the support film at the position as shown in the
figure above.
Separation rubber holder ASSY
Pin
Pin
ADF spring
Separation rubber
Support film
Upper document chute ASSY SX
NG
OK